ZAX Z80 debugger info found

Discussion in 'General Sega Discussion' started by SegaLoco, Mar 28, 2011.

  1. SegaLoco

    SegaLoco

    W)(at did you say? Misfit
    <a href="http://www.smspower.org/forums/viewtopic.php?t=12038" target="_blank">http://www.smspower.org/forums/viewtopic.php?t=12038</a>

    <!--quoteo--><div class='quotetop'>QUOTE </div><div class='quotemain'><!--quotec-->© 1991 Western Technologies, Inc.
    GENESIS DEVELOPMENT CARD REV C
    SC DS4992

    Memory capacity:

    2MB of SRAM (16x Sony CXK581000P 128Kx8 100ns SRAM)
    8K of EPROM (2x 27C16)

    Upon initial inspection it appears to have an IEEE 1284 (Centronics) connector on the back that interfaces to a standard PC parallel port. On the 68000 side this appears as an 8-bit I/O port at $A13000, which is in the /TIME range yet that pin is not connected on the cartridge. It may do its own address decoding instead.<!--QuoteEnd--></div><!--QuoteEEnd-->

    Edit: Forgot to mention, the floppy disk appears to be an actual debugging suite, but it requires the host hardware :p